Teleflex Marine 18-3677 Thermostat Kit

Teleflex Marine 18-3677 Thermostat Kit Review

Teleflex Marine 18-3677 Thermostat Kit Feature

• SIERRA 3677

Sierra Thermostat Kit for Cobra 4.3L, 4.3HO, 5.0L, 5.8L, and 5.8L EFI Engines, 1991 - 1997. Proper thermostat operation is key in getting peak engine performance and maximum fuel efficiency! This marine-grade Kit will withstand the rigors of "ugly" brackish and saltwater. Sierra Thermostat Kit (part no. 18-3677) replaces your original thermostat, thermostat gasket, and o-ring. Kit contains: Thermostat - replaces O.E.M. part no. 3856961; Thermostat Gasket (part no. 18-2917) - replaces O.E.M. part no. 3852111; O-ring (part no. 18-7170) - replaces O.E.M. part no. 3852071. Order up top-quality replacement parts for bottom dollar today! Sierra Thermostat Kit for Cobra 4.3L, 4.3HO, 5.0L, 5.8L, and 5.8L EFI, 1991-1997

Dorman 630-215 Rear Axle Shaft

Dorman 630-215 Rear Axle Shaft Review

Dorman 630-215 Rear Axle Shaft Feature

• Comes with the axle bearing, oil seal, wheel studs, and wheel nuts
• Direct replacement for a proper fit every time
• Durable steel construction for long-lasting performance
• Quality control measures, including on-the-vehicle testing, ensure that this part conforms to product standards

Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.

Lokar SK-6878 Shifter Knob Adapter for 3/8-16 Knob

Lokar SK-6878 Shifter Knob Adapter for 3/8-16 Knob Review

Lokar SK-6878 Shifter Knob Adapter for 3/8-16 Knob Feature

• Fits All Lokar Shifters
• Retains All Safety Benefits Of A Lokar Shifter
• Including The Positive Lock In Park And Neutral
• Allows the Use Of An Aftermarket Shifter Knob
• Made In The U.S.A.

Lokar Shifter Knob Adapter for 3/8-16 Knob is designed to adapt to most aftermarket shifter knobs. It can be used with any of Lokar's shifters. This continues with the same shift pattern and safety features that are found in Lokar's automatic shifter knobs. This includes the positive lock-out in park and neutral. The shifter adapter is designed with the common 3/8-16 and 3/8-24 threads found in most aftermarket shifter knobs. It has been designed with hidden jam nuts for a flush mount against the shifter knob. It has a chromed finish that blends with the Lokar chromed shifter lever that gives you the desired clean look with a custom knob. It comes with complete installation instructions.

Custom Look Chrome Driveshaft Drive Shaft Cover Kit For 1998-2006 Yamaha V-Star V Star Vstar 1100 Classic Custom 1998 1999 2000 2001 2002 2003 2004 2005 2006 98 99 00 01 02 03 04 05 06

Custom Look Chrome Driveshaft Drive Shaft Cover Kit For 1998-2006 Yamaha V-Star V Star Vstar 1100 Classic Custom 1998 1999 2000 2001 2002 2003 2004 2005 2006 98 99 00 01 02 03 04 05 06 Review

Custom Look Chrome Driveshaft Drive Shaft Cover Kit For 1998-2006 Yamaha V-Star V Star Vstar 1100 Classic Custom 1998 1999 2000 2001 2002 2003 2004 2005 2006 98 99 00 01 02 03 04 05 06 Feature

• Package include one piece of Drive shaft cover
• Measurement: appr L 13 1/4" x W 6" (33.6cm x 15cm); Diameter of the hole: 3/8" (10mm)
• Made of High toughness pressed structural steel, High strength & Lightweight
• Mirror chrome finished surface
• Fitment: 1998-2006 Yamaha V-Star 650 (Classic & Custom), 1998-2006 Yamaha V-Star 1100 (Classic & Custom)

This listing is for Brand new Motorcycle Drive shaft cover for Yamaha
Package include one piece of Drive shaft cover
Measurement: appr L 13 1/4" x W 6" (33.6cm x 15cm); Diameter of the hole: 3/8" (10mm)
Made of High toughness pressed structural steel, High strength & Lightweight
Mirror chrome finished surface
Mounting directly, just bolt on.
Custom great new look for your moto.

Fits the following Models:
1998-2006 Yamaha V-Star 650 (Classic & Custom)
1998-2006 Yamaha V-Star 1100 (Classic & Custom)
*Note: Please have professionals to install the items to avoid trouble which very often caused by inexperienced installer

Lokar SK-6872 Ivory 5-Speed Manual Shift Knob

Lokar SK-6872 Ivory 5-Speed Manual Shift Knob Review

Lokar SK-6872 Ivory 5-Speed Manual Shift Knob Feature

• Engraved w/Appropriate Shift Pattern
• Perfect Addition To Manual Trans Shifter Levers
• Incl. Thread Adaptors For Different Threads
• Made In The U.S.A.
• Lifetime Warranty

Lokar Ivory 5-Speed Manual Shift Knob has shifter knobs for 4-speed, 5-speed and 6-speed manual transmissions. They are 2 inches in diameter and includes 3/8-24 and 3/8-16 thread and polished jam nuts. It is engraved with appropriate shift pattern. They are available in Ivory, Black and White. They are a perfect addition to the Lokar Manual Transmission Shifter Levers.

OTC 7120A Drive-Pulley Installer for Cummins

OTC 7120A Drive-Pulley Installer for Cummins Review

OTC 7120A Drive-Pulley Installer for Cummins Feature

• Designed to install the drive pulley on Cummins NH and NTC 855 cubic inch engines
• The installer threads onto the pulley accessory drive shaft for easy installation

OTC Drive-Pulley Installer for Cummins is designed to install the drive pulley on Cummins NH and NTC 855 cubic inch engines. The installer threads onto the pulley accessory drive shaft for easy installation.

Prothane 1-1903-BL Black Drive Train Kit for TJ

Prothane 1-1903-BL Black Drive Train Kit for TJ Review

Prothane 1-1903-BL Black Drive Train Kit for TJ Feature

• Precision fabrication assures perfect fit
• Holds super grease for quiet operation
• Premium grade polyurethane components
• Provides necessary rigidity

Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.

Sierra International 18-2125 Marine Yoke for Mercruiser Stern Drive

Sierra International 18-2125 Marine Yoke for Mercruiser Stern Drive Review

Sierra International 18-2125 Marine Yoke for Mercruiser Stern Drive Feature

• Made by Sierra

YokeFits all Mercruiser #1 and Alpha units above s/n 1684188

Dorman 918-207 Transmission Oil Cooler

Dorman 918-207 Transmission Oil Cooler Review

Dorman 918-207 Transmission Oil Cooler Feature

• Application specific for a direct fit every time
• Replaced when replacing the transmission
• Air flows through the fins of the transmission oil cooler to cool the transmission oil flowing through it

Air flows through the fins of the Transmission Oil Cooler to cool the transmission oil flowing through it. When replacing your transmission be sure to replace the Transmission Oil Cooler. Application specific for a direct fit every time.

DID 520VT2-120 Gold Narrow X-Ring Chain with Connecting Link

DID 520VT2-120 Gold Narrow X-Ring Chain with Connecting Link Review

DID 520VT2-120 Gold Narrow X-Ring Chain with Connecting Link Feature

• Narrow width of the VT2 chain allows the chain to be used on motorcycles originally equipped with a non O-ring chain
• Maximum engine displacement - 500cc
• Tensile strength - 8440 pounds
• Projected wear life 30.6 times longer than a standard chain under similar conditions
• Master link included

D.I.D.'s 520VT2 chain is a X-ring chain designed for racing motorcycles that can't accommodate a wider sealed chain, due to clearance limitations, like the CRF250X, CRF450X, etc.

Lokar XTC-1000LS1 36" Throttle Cable Kit with Black Stainless Steel Housing and Black Fittings for GM LS1 Engine

Lokar XTC-1000LS1 36" Throttle Cable Kit with Black Stainless Steel Housing and Black Fittings for GM LS1 Engine Review

Lokar 36 inch Throttle Cable Kit with Black Stainless Steel Housing and Black Fittings for GM LS1 Engine has a specially extruded liner for extended cable life. It has aluminum ferrules to eliminate fraying. It has "U-Cut-To-Fit" outer housing. The Clevis is designed without cotter pins or set screws. It adapts to factory and aftermarket pedals. It has black housing. It is made in the U.S.A. It has a lifetime warranty.

Dorman HELP! 42081 Master Cylinder Gasket

Dorman HELP! 42081 Master Cylinder Gasket Review

Dorman HELP! 42081 Master Cylinder Gasket Feature

• MASTER CYLINDER CAP

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

JT Sprockets JTF506.15 15T Steel Front Sprocket

JT Sprockets JTF506.15 15T Steel Front Sprocket Review

JT Sprockets JTF506.15 15T Steel Front Sprocket Feature

• Made from SCM415 chromoly steel alloy
• Heat treated and hand finished to meet or exceed OEM standards
• Outlasts any mild steel or surface hardened sprocket
• 15 teeth steel countershaft sprocket

JT Sprockets ensure maximum durability and performance through accurate machining and using only the best grade of SCM415 Chromoly steel alloy. Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards for the powersports industry. Each sprocket goes through 10 quality control checks before it leaves the factory.

Timken HB88508AA Drive Shaft Center Support Bearing

Timken HB88508AA Drive Shaft Center Support Bearing Review

Timken HB88508AA Drive Shaft Center Support Bearing Feature

• Provides effective sealing for different conditions
• Offers maximum load carrying capacity
• Provides even load distribution
• Enhances lubrication
• Designed to accommodate both inch and metric shafting

Timken Drive Shaft Center Support Bearings provide load support for rotating shaft’s axis. These high-strength caps and bases provide optimal bearing support and load distribution. They feature multiple sealing which protect against contamination. These bearings are designed to accommodate both inch and metric shafting.

Sierra International 18-3550 140 Degree Marine Thermostat for Mercruiser Stern Drive

Sierra International 18-3550 140 Degree Marine Thermostat for Mercruiser Stern Drive Review

Sierra International 18-3550 140 Degree Marine Thermostat for Mercruiser Stern Drive Feature

• SIERRA Marine 3550

Alternate part numbers: Sierra 8-3550, SIE_3550, SIE-3550, SIE3550, 47-3550

Precision L44610 Tapered Bearing

Precision L44610 Tapered Bearing Review

Precision L44610 Tapered Bearing Feature

• Manufactured to AFBMA standards using high quality materials
• Manufactured at factories which have ISO/TS16949:2002 certified quality management systems
• Components are sample inspected at each process to ensure all dimensional and visual specifications are met
• 12 months or 12,000 miles warranty

Precision ball, tapered, and wheel bearings are manufactured at factories which have ISO/TS16949:2002 certified quality management systems. Components are sample inspected at each process to ensure all dimensional and visual specifications are met. 100 per cent final inspection prior to packaging is done assuring the highest level of quality.

JT Sprockets JTR820.42 42T Steel Rear Sprocket

JT Sprockets JTR820.42 42T Steel Rear Sprocket Review

JT Sprockets JTR820.42 42T Steel Rear Sprocket Feature

• Made from C49 high carbon steel
• Heat treated and hand finished to meet or exceed OEM standards
• Outlasts any mild steel or surface hardened sprocket
• 42 teeth steel rear sprocket

JT Sprockets ensure maximum durability and performance through accurate machining and using only the best grade of C49 High Carbon steel. Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards for the powersports industry. Each sprocket goes through 10 quality control checks before it leaves the factory.